[email protected] Whatsapp :+86 15027768227

Home >  News

Stainless steel plate chain line chain plate conveyor belt use and maintenance

Jan. 13, 2023

When the plate chain conveyor is used for a period of time, it must be maintained and maintained. This is a key to increasing the use time of the chain conveyor; the chain conveyor cannot be left alone when it has not been used for a long time Fend for itself, maintenance is also indispensable. For chain plates that are not suitable for a long time, the maintenance is to ensure that the temperature of the storage environment should be between -18-40 ℃; during the storage process, the product should be placed in a roll without folding, and it should be turned once every 90 days during the storage period. The chain plate in use of the plate chain line conveyor should be maintained. After the conveying equipment is used, the power supply of the conveyor should be turned off, and the surface of the chain plate conveyor should be cleaned. For the lifting chain plate installed on the conveying equipment, start the conveyor empty to prevent the motor from overloading and the chain plate from slipping; before stopping the conveyor, all materials on the chain plate should be unloaded unless there is no special situation.

Clean the chain plate and the conveyor shell to confirm that there are no scars or burrs left by machining. Check whether the size, shape and processing quality of the shaft and shell are in accordance with the drawings. When installing the chain conveyor belt, apply mechanical oil to the matching surfaces of the qualified shaft and the shell. During regular inspection and replacement of conveyor parts, it is necessary to disassemble the conveyor chain conveyor belt. Usually the shaft and the chain conveyor belt will continue to be used, and the chain conveyor belt will continue to be used. The structural design should take into account that when disassembling the bearing, the conveyor chain plate, chain plate and other parts will not be damaged, and there must be appropriate disassembly tools.